Vivotek IP8130 User Manual page 85

■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the
Deny List to deny access� Please note that those checked connections will only be disconnected
temporarily and will automatically try to re-link again (via IE Explorer or Quick Time Player)� If
you want to enable the denied list, please check Enable access list filtering and click Save in
the first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button� Please note that those checked connections will only be disconnected temporarily and
will automatically try to re-link again (IE Explorer or Quick Time Player)�
Enable access list filtering: Check this item and click Save if you want to enable the access list
filtering function.
Filter
Filter type: Select Allow or Deny as the filter type. If you choose Allow Type, only those clients
whose IP addresses are on the Access List below can access the Network Camera, and the others
cannot access� On the contrary, if you choose Deny Type, those clients whose IP addresses are
on the Access List below will not be allowed to access the Network Camera, and the others can
access�
Then you can Add a rule to the following Access List� Please note that the IPv6 access list column
will not be displayed unless you enable IPv6 on the Network page� For more information about
IPv6 Settings, please refer to Network -> General settings on page 57 for detailed information�
Please select the Enable access list filtering checkbox for your configuration to take effect.
VIVOTEK
User's Manual - 85