Vivotek IP8130 User Manual page 61

PPPoE (Point-to-point over Ethernet)
Select this option to configure your Network Camera to make it accessible from anywhere as long
as there is an Internet connection� Note that to utilize this feature, it requires an account provided
by your ISP�
Follow the steps below to acquire your Network Camera's public IP address�
1� Set up the Network Camera on the LAN�
2. Go to Configuration > Event > Event settings > Add server (please refer to Add server on page
102) to add a new email or FTP server�
3. Go to Configuration > Event > Event settings > Add media (please refer to Add media on page
101)�
Select System log so that you will receive the system log in TXT file format which contains the
Network Camera's public IP address in your email or on the FTP server�
4. Go to Configuration > Network > General settings > Network type. Select PPPoE and enter the
user name and password provided by your ISP� Click Save to enable the setting�
5� The Network Camera will reboot�
6� Disconnect the power to the Network Camera; remove it from the LAN environment�
VIVOTEK
User's Manual - 61