Visonic PowerMaxExpress Installer's Manual page 32

Common area zone
types
Perimeter
Delay zones
Perimeter follower
Interior
Interior follower
Home / Delay
Emergency
Fire
Flood
Gas
Temperature
24-hour silent
24-hour audible
Non-alarm
32
Table A1 – Common Area Definitions
• Acts as defined only after the last assigned partition is armed AWAY or HOME.
• In case that one of the partitions is disarmed, an alarm initiated from this zone is
ignored for all assigned partitions.
• Delay zones will not trigger an entry delay unless all assigned partitions are armed. It
is, therefore, not recommended to define delay zones as common areas.
• Act as defined only after the last assigned partition is armed AWAY or HOME.
• In case that one of the partitions is disarmed, an alarm initiated from this zone is
ignored for all assigned partitions.
• In case that one of the common area assigned partitions is in a delay state (and the
other partitions are armed), the alarm will behave as a perimeter follower for this
partition only. The event will be ignored for other assigned armed partitions.
• Acts as defined only after the last assigned partition is armed AWAY.
• In case that one of the partitions is disarmed or armed HOME, an alarm initiated from
this zone is ignored for all assigned partitions.
• Acts as defined only after the last assigned partition is armed AWAY.
• In case that one of the partitions is disarmed or armed HOME, an alarm initiated from
this zone is ignored for all assigned partitions.
• In case that one of the common area assigned partitions is in a delay state (and the
other partitions are armed), the alarm will behave as an interior follower for this
partition only. The event will be ignored for other assigned armed partitions.
• Acts as a Perimeter-Follower type when all assigned partitions are armed AWAY.
• Acts as a Delay type when at least one of the assigned partitions is armed HOME.
• Will be ignored when at least one of the assigned partitions is disarmed.
• Always armed.
Definition
D-302980