Viking AES--2000 Technical Practice page 4
Accessible entry system
Hide thumbs
Also See for AES--2000:
- Technical practice (6 pages) ,
- Buyer's manual (16 pages) ,
- Application note (2 pages)
Table of Contents
Advertisement
B. Surface Mount Chassis (AES-2000S)
The AES-2000S comes with a black powder painted steel surface mount chassis. A knockout is provided on the bot-
tom of the chassis as an alternate wire entrance. The four outer holes on the back of the chassis are for mounting the
box to the wall.
4.83"
9.66"
Set
Screw
Step 1. To mount the unit to a wall, unlock the panel using the key provided and swing the front panel open.
Step 2. Use the single gang or junction box holes provided in the back of the enclosure for alignment.
Step 3. Fasten the enclosure securely to the wall using the (4) outer chassis mounting holes.
Front View of Steel Surface Mount Chassis
Chassis Mounting Holes
Junction Box Holes
0.875" Diameter
Knockout
4
6.13"
4.5"
1.5"
0.875" Diameter
Knockout
AES-2000
(3) Hinge Holes
Single Gang Box Holes
12.26"
9.0"
3.0"
(4) 0.16" Diameter
Typical
* Optional Braille
"Audio" label (included)
AUDIO
Hinge
(2) 0.20" x 0.43"
Slots Typical
3.0"
1.5"
1.65"
3.0"
3.3"
6.0"
(4) 0.26" Diameter
Typical
Steel Surface Mount
Chassis (included)
(3) Screws (included) for
mounting the AES-2000 to the
surface mount chassis.
4.0"
4.0"
Use Sealant
Advertisement
Table of Contents
