Viessmann VITODENSd 100-W Technical Data Manual page 15

Vitodens 100-W, WB1B Technical Data
Mounting
Domestic Hot Water Production via DHW Storage Tank
Vitodens 100-W boilers can be used in conjunction with
the stand-alone DHW storage tanks offered by Viessmann
(a separate DHW controller should be field supplied).
All Viessmann DHW storage tanks sold in North America
are available in "Vitosilver" finish only.
Size and select the DHW storage tank based on the
forecast DHW consumption of the building in question.
For further technical information on DHW storage tanks,
see the Vitocell-V Technical Data Manuals.
Mounting Vitodens 100-W boiler
Start-up and Maintenance
Start-up and Maintenance
Legend
A Boiler mounting template
Wall Mounting Information
The Vitodens 100-W (model WB1B 26 and 35) comes with
a template, which allows you to easily mark the location
of the screws for the mounting bracket and the location
of the flue gas pipe on the wall (Viessmann coaxial PPS
vent system only).
The connection to the heating circuits must be made on
site (installation fittings are supplied in the Installation
Fittings package supplied with the boiler).
Mounting Vitodens 100-W boiler and the CombiPLUS
Legend
A Boiler mounting template
B CombiPLUS mounting template
Installation
15