Setting The Room Temperature - Viessmann VITODENS Operating Instructions Manual

Central heating
Selecting a heating circuit
Heating circuit 1
Party mode
Economy mode
Set room temperature
Set reduced room temp
Continue with
Note
If you return to the standard menu with
, the header will again display "HC1"
(see page 10).
For changes to the heating circuit display
in the standard menu, see page 30.

Setting the room temperature

Setting the room temperature for
standard heating mode
Factory setting: 20 °C
For the heating circuit displayed in
the header
Proceed as described on page 10.
For the other heating circuits
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 17).
4. "Set room temperature"
5. Set the required value.
18
(cont.)
HC1
HC1 Htg circ. selection
Ù Ù Ú Ú
ê
Ú
ê
OK
Setting the room temperature for
reduced heating mode (night set-
back)
Factory setting: 3 °C
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 17).
4. "Set reduced room temp"
5. Set the required value.
The rooms are heated to this tempera-
ture:
■ Between the time phases for standard
heating mode (see page 19).
■ In the holiday program (see
page 23).
Ù
Heating circuit 2
Was selected
HC2
HC2
Ú