Scanning Information - Viessmann VITODENS Operating Instructions Manual

Scanning

Scanning information

Subject to the connected components
and settings made, you can scan current
temperatures and operating conditions.
The extended menu splits the informa-
tion into groups:
■ "General"
■ "Heating circuit 1"
■ "Heating circuit 2"
■ "Heating circuit 3"
■ "DHW"
■ "Solar"
■ "Reset data"
Note
If heating circuits have been given
names, the name is displayed (see chap-
ter "Entering names for the heating cir-
cuits").
For detailed scanning options for the
individual groups, see chapter "Scan-
ning options in the extended menu".
Extended menu
1.
2. "Information"
3. Select the category.
4. Select the required scan.
Scanning in conjunction with solar
thermal systems
Extended menu
1.
2. "Solar energy"
The solar energy yield for the past 7 days
is displayed on a graph.
32
The flashing line on the graph indicates
that the current day is not yet over.
Solar energy
4.0
0
We Th Fr Sa Su Mo Tu
kWh
Su 03.10.10
Select with
Note
Further scanning options, e.g. for the
solar circuit pump hours run, can be
found in the extended menu under
"Information" in the "Solar" group.
Resetting data
You can reset the following data:
■ Burner hours run.
■ Fuel consumption, if set by your heat-
ing contractor.
■ In conjunction with a solar thermal sys-
tem:
Solar energy yield, solar circuit pump
hours run and hours run output 22.
■ All the above data simultaneously.
Extended menu
1.
2. "Information"
3. "Reset data"
We
1.3