Changing The Room Temperature For A Few Days Only; Setting The Holiday Program - Viessmann VITOTROL 100 Operating Instructions Manual

Setting a permanent room temperature
06. Confirm with OK.
07. Select with / the program you
want to change (e.g. "Prog 1").
08. Confirm with OK.
09. Select with / "Heating circuit".
10. Confirm with OK.
11. Select with / "Copy from".

Changing the room temperature for a few days only

Setting the holiday program

When you are away on holiday, the fol-
lowing energy saving options are availa-
ble:
■ You can shut the central heating down
completely by selecting frost protec-
tion mode "Frost pr." (see page 12).
or
■ You can set the central heating to min-
imum energy consumption (e.g. to pre-
vent your house plants from being
damaged by frost). To do so, select the
holiday program "j".
When the holiday program is enabled,
the rooms are heated with the reduced
room temperature ("Reduced").
Note
DHW heating is OFF.
1. Open the flap.
2. Press twice .
Central heating
(cont.)
12. Confirm with OK.
13. Select with / the program you
want to copy.
14. Confirm with OK.
15. Select with / "Set" to make
changes.
3. Select with / "Holiday"
4. Confirm with OK.
5. Select with / "ON".
6. Confirm with OK.
7. With / set the required day and time
for start and end of the holiday pro-
gram.
8. Confirm respectively with OK.
Terminating the holiday program
■ The holiday program terminates auto-
matically when the end time has been
reached
■ If you want to delete the holiday pro-
gram early:
1. Open the flap.
2. Press twice .
15