Viessmann VITOTROL 100 Operating Instructions Manual page 21

Selecting the time program
Disabling time phases
To disable a time phase, set the same
value for the start and stop times.
Copying a time program
You can copy time programs, for exam-
ple to make a new time program from
another where only minor changes are
required.
01. Open the flap.
02. Press twice .
03. Select with / "SETTINGS".
04. Confirm with OK.
05. Select with / "Programs".
06. Confirm with OK.
07. With / select the program you
want to change (e.g. "Prog 1").
08. Confirm with OK.
09. Select with / "DHW".
10. Confirm with OK.
11. Select with / "Copy from".
12. Confirm with OK.
13. Select with / the program you
want to copy.
14. Confirm with OK.
(cont.)
15. Select with / "Set" to make
changes.
DHW heating
21