Changing The Room Temperature For A Few Hours Only; Change With Keys; Setting Party Mode - Viessmann VITOTROL 100 Operating Instructions Manual

Central heating
Changing the room temperature for a few days...
3. Select with / "Holiday"
4. Confirm with OK.

Changing the room temperature for a few hours only

You can change the room temperature
for a few hours without permanently
altering the settings.
The modified temperature remains ena-
bled until the next changeover within a
program or until the next program
change.
If you want to raise the room tempera-
ture unexpectedly:
■ In programs "Prog 1" to "Prog 3" and
"Manual", you can increase the room
temperature with (see the following
chapter).
or
■ Press g to select party mode (only in
programs "Prog 1" to "Prog 3"; see
page 16).

Change with keys /

1. Press / .
The current set temperature will be
displayed.
2. With / set the required tempera-
ture.

Setting party mode

In party mode, the reduced room tem-
perature will be raised automatically to
the selected standard room temperature
("Comfort").
16
5. Select with / "OFF".
If you want to lower the room tempera-
ture unexpectedly:
■ In programs "Prog 1" to "Prog 3" and
"Manual" you can decrease the room
temperature with (see the following
chapter)
or
■ Press û to select economy mode
(only in programs "Prog 1" to
"Prog 3"); see page 17).
3. The value is accepted automatically
after approx. 5 s.
Note
DHW heating is ON.
1. Press g for approx. 5 s.
The display shows Þ.
(cont.)