Viessmann VITOTROL 100 Operating Instructions Manual page 14

Central heating
Setting a permanent room temperature
You can select time phases for several
days (day groups) or for individual days:
■ "MO–SU" for the same time phases
every day of the week
■ "MO–FR" for the same time phases
Monday to Friday
■ "SA–SU" for the same time phases on
Saturday and Sunday
■ "SINGLE DAY" different time phases
for single days
Note
Settings for individual days take prior-
ity over settings for several days.
01. Open the flap.
02. Press twice .
03. Select with / "SETTINGS".
04. Confirm with OK.
05. Select with / "Programs".
06. Confirm with OK.
07. With / select the program you
want to change (e.g. "Prog 1").
08. Confirm with OK.
09. Select with / "Heating circuit".
10. Confirm with OK.
11. Select with / "Set".
12. Confirm with OK.
13. Select with / the required day
group/individual day.
14
(cont.)
14. Confirm with OK.
15. Select with / the time phase or first
the required day.
16. Confirm with OK.
17. With / set the required start time,
stop time and the temperature, one
after the other (e.g."Reduced").
18. Confirm respectively with OK.
19. Proceed as described in points 15 to
18 to set further time phases.
Note
Should gaps be created between
the time phases, these are closed
automatically by an extension to the
previous time phase.
Disabling time phases
To disable a time phase, set the same
value for the start and stop times.
Copying a time program
You can copy time programs, for exam-
ple to make a new time program from
another where only minor changes are
required.
01. Open the flap.
02. Press twice .
03. Select with / "SETTINGS".
04. Confirm with OK.
05. Select with / "Programs".