Setting A Permanent Room Temperature; Setting An Individual Time Program - Viessmann VITOTROL 100 Operating Instructions Manual

Setting a permanent room temperature

You can select the following tempera-
tures:
■ Room temperature "Comfort" (stand-
ard room temperature)
Setting in the delivered condition:
21 °C
Setting range: 10 to 40 °C
■ Room temperature "Eco"
Setting in the delivered condition:
19 °C
Setting range: 10 to 40 °C
■ Reduced room temperature
"Reduced"
Setting in the delivered condition:
16 °C
Setting range: 10 to 40 °C
01. Open the flap.
02. Press twice .
03. Select with / "SETTINGS".

Setting an individual time program

Setting time phases
In the preset time programs "Prog 1" to
"Prog 3", the day is split into six time
phases.
However, you can also split the day into
less than six time phases:
■ For time phase 1, always select "Time
ph. 1".
and
■ For the last time phase, always select
"Time ph. 6".
Central heating
04. Confirm with OK.
05. With / set the "Tmp settings".
06. Confirm with OK.
07. With / set the required tempera-
ture for "Comfort".
08. Confirm with OK.
09. With / set the required tempera-
ture for "Eco".
10. Confirm with OK.
11. With / set the required tempera-
ture for "Reduced".
12. Confirm with OK.
Example:
In "Prog. 3", you only want to enable
three time phases. "Comfort" from
06:00 h to 10:00 h; "Eco" from 10:00 h
to 22:00 h; and "Reduced" from 22:00 h
to 06:00 h.
Select "Time ph. 1", "Time ph. 2" and
"Time ph. 6".
Time phases 3, 4 and 5 are automatically
disabled.
For every enabled time phase, the fol-
lowing must be entered:
■ Start time
■ Stop time
■ Temperature ("Comfort", "Eco",
"Reduced")
13