Changing The Room Temperature For A Few Days Only; Setting A Holiday Program - Viessmann VITOTROL 100 Operating Instructions Manual

Setting a permanent room temperature
07. With v/V select the program you
want to change (e.g. "Prog 1").
08. Confirm with OK.
09. With v/V select "Copy from".
10. Confirm with OK.

Changing the room temperature for a few days only

The following energy saving options are available for times when you are on holi-
day:
■ You can completely stop central heating by selecting Frost protection mode "Ç".
or
■ You can set central heating to minimum energy consumption (e.g. to prevent your
houseplants from being damaged by frost). For this, select the holiday program
"j". When the holiday program has been enabled, the rooms are heated to the
reduced room temperature ("Reduced").

Setting a holiday program

1. Open the flap.
2. Press å twice.
3. With v/V select "Holiday".
4. Confirm with OK.
5. With v/V select "ON".
6. Confirm with OK.
7. With v/V select the required day
and time for start and end of the hol-
iday function.
8. Confirm respectively with OK.
Adjusting the room temperature
(cont.)
11. With v/V select the program you
want to copy.
12. Confirm with OK.
13. With v/V select "Set" to make
changes.
Terminating the holiday program
■ The holiday program terminates auto-
matically when the end time has been
reached.
■ If you want to delete the holiday pro-
gram early:
1. Open the flap.
2. Press å twice.
3. With v/V select "Holiday".
4. Confirm with OK.
5. With v/V select "OFF".
15