Selecting The Effect Type - Fostex VF-16 Owner's Manual

Effect types preset for EFF 2
Name
L01
~
1~28 are the same effect types as the EFF 1 presets listed on the preceding page. (For details refer to the preceding page.)
L28
L29 MonoDELAY
L30 PanDELAY
L31 MonoBpmDL
L32 PanBpmDL
L33 Short DL
L34 DOUBLING
L35 CHORUS
L36 FLANGE
L37 MonoPITCH
L38 DlyPITCH

Selecting the effect type

Here's how to select the effect type for EFF 1 or EFF
2.
EFF EDIT
EFF1
MUTE
Press this to set the effect type
for EFF 1.
* As described earlier in "Basic Recording and Play
back," raise the CHANNEL fader of a channel to which
a signal is being input and raise the MASTER fader,
so that the sound is heard at an appropriate level.
* As described earlier in "Setting the effect send level,"
raise the EFF 1 SEND level or the EFF 2 SEND level for
the channel(s) to which you wish to apply the effect.
1. If you wish to set EFF 1, press the EFF EDIT mode [EFF
1] key. To set EFF 2, press the [EFF 2] key.
With the initial settings, the following displays will
appear.
When the [EFF 1] key is pressed:
With the initial settings, [L01: Norm HALL] will appear.
Parameter type
DELAY
Mono delay
DELAY
Panning delay
BPM DELAY
Mono delay. Specify BPM and note value to set the delay time.
BPM DELAY
Panning delay. Specify BPM and note value to set the delay time.
SHORT DELAY
Short delay that allows you to set the delay time precisely.
DOUBLING
Doubling that allows you to set separate delay times for L and R.
CHORUS
Produces a chorus effect. A doubling effect can also be added.
FLANGE
Produces a flanging effect.
MONO PITCH
Pitch shift adjustable in a +/-2 octave range.
DELAY PITCH
Pitch shift with a feedback delay, allowing strange effects to be produced.
EFF2
MUTE
Press this to set the effect type
for EFF 2.
Explanation
When the [EFF 2] key is pressed:
With the initial settings, [L35: CHORUS] will appear.
2. Use the [JOG] dial to select the effect type.
The effect types listed in the foregoing tables will
appear in succession. When an effect type appears, it
will be blinking. The blinking indicates that the effect
type has not yet been selected.
3. Press the [ENTER/YES] key.
The effect type will be finalized, and the parameter
setting screen will appear. The default (initial) param-
eter values will be displayed.
Details on the parameters are given in the following
section, "Parameter settings."
4. To exit Effect Edit mode, press the [EXIT/NO] key twice
in succession.
You will return to Normal display.
< Note >
When you press the [ENTER/YES] key to finalize the ef-
fect type, the sound will be muted for an instant.
50
flashing