Fostex VF-16 Quick Start

VF-16 QUICK START – BUS METHOD RECORDING
This method is used to route the XLR INPUT(s) to different tracks.**

PRIOR TO RECORD:

Since Program 1 (PGM-1) is a record-protected demo, you must first exit PGM-1 prior to recording and
disable record protect.
1. Press the PGM SEL
2. Using the
3. Press the ENTER
ENTER
4. Using the
for display to read "OFF". Press
The XLR inputs are located at the top of the VF16:
The audio levels for these XLR inputs are controlled using FADER#15 & FADER#16 (bottom row)

TO START RECORDING (Bus Method)

For the following example let's record on Track 1 using XLR Input H.
1. Connect your audio signal to Input H
2. Press the INPUT SEL
3. Select the
(USING THE XLR INPUTS)
button
JOG wheel, turn until display reads "NEW PGM?"
button *Note: From here you can name your program and press
....or.... to skip simply press
JOG wheel, turn until display reads "REC PROTECT". Press
XLR Input G
button (located underneath the display)
CH SEL#H button above fader H (16).
Display now reads "H" with "IN" underneath it.
EXIT.
ENTER. Press EXIT.
XLR Input H
ENTER. Turn JOG