Page 1
8288681100 VF-16 Owner’s Manual <Supplement> Save/Load using CD-RW The VF-16 software has been upgraded to Version 2.0 which allows save/load of song data using a CD-RW drive. This supplementary manual only de- scribes the operations and notes regard- ing the save/load functions of song data using a CD-RW drive.
The writing speed depends on a CD-RW drive but it is limited to 8 times. For save/load of the VF-16 data, use discs that can be written at 4 times or higher speed. Do not use discs that only can be written at realtime or twice speed.
Page 3
• When a CD-RW drive connected to the VF-16 is turned on, only the eject switch of the drive can be used. Other controls such as the level control and the play button are not effective.
Page 4
1. After turning on both the VF-16 and the CD-RW drive connected, insert a disc to the CD-RW drive. 2. Press the [SETUP] key of the VF-16 to enter the setup mode. The display shows the screen for selecting the setup menu.
Page 5
<Note for saving data to more than one disc> If you save data to more than one disc, we recom- mend to put a number on each disc in the saving order (such as DISC-1 , DISC-2 , etc.) so that you will easily know the order for inserting discs when load- ing data.
Page 6
CD-RW disc to which data has been saved is prepared. <Note> Do not carry out any VF-16 key operation until the ac- cess process to the CD-RW disc is completed. 1. After turning on both the VF-16 and the CD-RW drive connected, insert the disc to the CD-RW drive.
Page 7
If you press the [ ENTER/YES ] key (see the next step) while selecting an existing program as the destina- tion, the display shows " Void! " and the VF-16 ignores the operation. 6. While "New PGM" is shown, press the [ENTER/YES] key.
Need help?
Do you have a question about the VF-16 and is the answer not in the manual?
Questions and answers