Table of Contents
Advertisement
● Selecting.the.battery.type.[BATTERY]
To display the status and alert regarding battery
condition correctly, set the "BATTERY" item in
the menu appropriately (see "Display for showing
battery status" on page 9) .
1 . While the recorder is stopped, press and hold
the [MENU] key for more than two seconds .
The unit enters the menu mode and a menu
item is shown on the display .
2 . Press the [MENU] key as many times as re-
quired to select the "BATTERY" menu item .
M> BATTERY
> ALKALI
<Memo>: The long press of the [MENU] key chang-
es the menu item in reverse direction .
3 . Use the [-/DOWN] or [+/UP] key to select the
battery type according to the batteries set in
the unit .
ALKALI: When alkaline batteries are set .
Ni-MH: When Ni-MH batteries are set .
4 . To exit the menu mode, press the [EXIT] key .
Using.menu
Menu.item.details
● Selecting.the.infrared.controlled.device
. [IR.REMOTE]
To start or stop DSLR recording in sync with the
press of the REC key of the unit using infra-red
connection, set the "IR REMOTE" menu item ap-
propriately (see "Starting/stopping DSLR record-
ing in sync with the unit" on page 26) .
1 . While the recorder is stopped, press and hold
the [MENU] key for more than two seconds .
The unit enters the menu mode and a menu
item is shown on the display .
2 . Press the [MENU] key as many times as re-
quired to select the "IR REMOTE" menu item .
<Memo>: The long press of the [MENU] key chang-
es the menu item in reverse direction .
3 . Use the [-/DOWN] or [+/UP] key to select either
of the following .
OFF: The infrared remote control function is
●
disabled .
Canon: The infrared remote control function for
●
a Canon DSLR is enabled .
The setting is effective immediately .
4 . To exit the menu mode, press the [EXIT] key .
20
M> IR REMOTE
> OFF
Advertisement
Table of Contents
