Table 4-6. Status: Partner State - NEC Express5800/320Ma User Manual

Table 4-6. Status: Partner State

Partner State
DC On
DC Off
BIOS POST
Hung: BIOS POST
OS Booting
Hung: OS Booting
OS Up
Hung: OS Up
OS Rebooting
Hung: OS Rebooting
OS Shutting Down
Hung: OS Shutting Down
State Sensitive Recovery:
NMI issued
State Sensitive Recovery:
Reset
Related Topics
•
"Activity Log" on page 4-21
•
"Saving the Activity Log to a File" on page 5-1
•
Troubleshooting
Description
The partner operating system is shut down, but system power
is still on.
The partner operating system is shut down and system power
is off (but the system still has housekeeping power).
The partner system is performing a BIOS Power On Self Test
(POST).
The partner system hung in the BIOS POST.
The partner operating system is booting.
The partner system hung in the boot process.
The partner operating system is up. (However, the system
might not be available for use until other system resources
finish loading.)
The partner operating system is hung.
The partner operating system is rebooting.
The partner system hung while rebooting.
The partner operating system is shutting down.
The partner system hung while the operating system was
shutting down.
The partner operating system has crashed. The system
controller has issued a non-maskable interrupt (NMI) to save a
dump file and reset the partner operating system. (For more
information about what occurs during a state-sensitive
recovery, see the Express5800/320Ma Virtual Technician
Module User's Guide).
The system controller is performing a hard reset of the partner
system.
Viewing Active Upgrade Process Status
Performing the Upgrade 4-27