Selecting Event Log Files To Back Up; Table 3-2. Selection Of Application Services - NEC Express5800/320Ma User Manual

Selecting Event Log Files to Back Up

Each service on the Application Services page has a three-state check box, as
described in

Table 3-2. Selection of Application Services

Check Box
State
Cleared
Checked
Checked
(Gray)
To select a service for the Active Upgrade console to control
1. On the Application Services page, find a service you want to stop and start.
2. Click the check box to the left of the service name.
3. Repeat these steps for each service you want to stop and restart.
To deselect a service, clear the check box to the left of the service name.
(By default, the services on the Application Services page are listed alphabetically. If
you prefer to sort them by other criteria, click one of the column headings. For example,
if you want to group services by those you have selected and not selected, click the
heading above the check boxes.)
When you have finished selecting services to control, or if you have no services to
control, you can click Next to proceed with the next configuration step.
Related Topics
•
"Configuring Custom Actions" on page 3-12
•
"Managing Critical Applications During the Upgrade Process" on page 2-6
•
"Displaying the Upgrade Summary" on page 3-19
Selecting Event Log Files to Back Up
Use the Log File Backup page to optionally preserve Windows Event Viewer log files
from the Production Side of your system during the Active Upgrade process.
3-10 Express5800/320Ma: Active Upgrade™ User's Guide
Table 3-2.
Description
Not selected.
Selected in the current configuration file.
Selected in a child configuration file. If applicable, you can click the
check box to explicitly select the service in the current configuration
file, but you cannot deselect it without editing the child configuration.