Verifying The Upgrade Side Before Committing The Upgrade - NEC Express5800/320Ma User Manual

Active upgrade
Hide thumbs Also See for Express5800/320Ma:
Table of Contents

Advertisement

Related Topics

"Verifying the Upgrade Side Before Committing the Upgrade"

"Committing the Upgrade" on page 4-18
"Viewing Active Upgrade Process Status" on page 4-21
"Aborting the Upgrade" on page 4-19
Troubleshooting
Verifying the Upgrade Side Before Committing the Upgrade
After you have merged the system, your critical applications (including the Active
Upgrade console) are running from the software on the Upgrade Side system disks. At
this point, you can test the software you installed and verify the general health of the
system with full access to the system's resources, including:
Network resources
Internal data disks
For example, you might want to perform the following tasks before you commit the
upgrade:
Verify that all of your critical applications have restarted on the Upgrade Side (see
"Verifying the Status of Application Services" on page
Verify that you have access to your network and application data disks.
Verify that client systems can reach all of the services that your system provides.
Verify the presence and version number of each software package (see
the Status of Installed Software" on page
Verify that you can start and run any applications that you have installed or
upgraded (if they are not already running).
Check the configuration settings for your applications and the operating system,
which could have been altered by software installation.
If you are satisfied that everything is working correctly, you can
make the changes permanent.
If there are any problems, you can
state. However, aborting the upgrade while the system is in merge mode incurs
downtime, because the Active Upgrade console must stop your critical applications on
the Upgrade Side before it can restart them on the Production Side.
Related Topics
"Committing the Upgrade"
5-3).
abort the upgrade
to return the system to its original
Merging the System
5-2).
"Verifying
commit the upgrade
Performing the Upgrade
to
4-17

Advertisement

Table of Contents
loading

Table of Contents