Advertisement
Programming
Configuring the MIPU
1. Go to IP Telephony > IPU Config. Enter the public IP address of the MIPU card provided by the SIP
trunk provider.
2. FB01 – MIPU IP address. Must be a public IP address. The IP address can be static assignment or
assigned by a DHCP server.
3. FB02 – Subnet Mask. As applicable.
4. FB03 – Default Gateway Address. From IT department.
5. There is only one interface on an MIPU, leave the second interface blank.
12 of 14
Businesses Save Money with Toshiba's New SIP Trunking Feature
Advertisement
