Installing The Drivers And The Control Panel; Widows 98 Se Installation - TerraTec PHASE 22 Manual

Installing the drivers and the Control Panel

The PHASE 22 system is shipped with drivers for the Windows 98SE, Windows ME,
Windows 2000, Windows XP and MAC OS10 x operating systems. Windows 95/98/NT 4
as well as MAC OS9.x are not supported. You should therefore determine which operat-
ing system you are using before installing the card. For information on your Windows op-
erating system and its version number, please check the "System" dialog in the Windows
Control Panel.
In the following driver installation descriptions, <CD> stands for the drive letter of the CD-
ROM drive containing the PHASE driver CD.

Widows 98 SE installation

1. Boot your computer after installing the PHASE 22 PCI card.
2. During the bootup process, the Windows hardware wizard will identify the new hard-
ware as a "PCI Multimedia Audio Device". Confirm by clicking "Next".
3. The hardware wizard will ask you how you would like to continue. Select the "Search
for the best driver for my device (Recommended)" item and confirm with "Next".
4. Check the "Specify a location" box and enter the path to the driver on the CD.
<CD>:\PHASE 22\Driver\PC\vX.XX (vX.XX stands for the driver version). Alter-
natively, you can also select the path to the best driver of your PHASE 22 PCI system
using the mouse by clicking "Browse...". Confirm by clicking "Next".
5. In the last window, the hardware wizard will report that the driver software has been
installed successfully. Close the wizard by clicking "Finish".
If Windows requests a second driver file, please refer to the aforementioned directory on
the PHASE CD-ROM. It is also possible (e.g. if this is the first sound card installation in
your system) that some additional Windows extensions have to be installed. Please have
your Windows CD ready for this purpose.
If contrary to all expectations a request should appear for you to perform some action and
you are not sure about it, then pressing the Enter key is generally a safe action.
After a successful driver installation, you should verify that your Windows 98SE system is
functioning properly. The Device Manager presents an overview of hardware components
installed and recognized on your computer. The Device Manager can be found in the
Control Panel under "System."
After successful driver installation, the PHASE 22 Control Panel can be installed easily
using the autorun option (<CD>:\autorun.exe). Follow the instructions on the screen
to install the various bundled software programs. The control panel application is also
easy to remove from your system. To do so, open the "Add/Remove Programs" dialog
from the Control Panel. Search for the program to be deleted, select it and click
"Change/Remove".
PHASE 22 (English) 11