The Phase Control Panel - TerraTec PHASE 22 Manual

Still more cards? No problem: Simply attach another cable from the Sync-Out of the sec-
ond card to the Sync-In of the third. And, last but not least, a cable from the Sync-Out of
the third, to the Sync-In of the fourth (and last) PCI card.

The PHASE Control Panel

The PHASE ControlPanel will now automatically configure the MasterClock settings,
since the cards are now digitally synchronized. The clock of the first (master) card is now
set to "Internal". All additional cards (you can select the models on the right-hand side of
the ControlPanel with "Select Card#") are now set to external synchronization.
All interfaces will now run using the sampler frequency set on the master. If you would like
to also use an external clock for the first card (using a DAT recorder, for example), set its
master clock to "External" as well. The sync information are transmitted accordingly.
PHASE 22 (English) 37