Sampling Frequency - Fostex D-108 Quick Operation Manual

D-108 Quick Operation Guide
<Notes on setting the sampling frequency>
• Selecting a sampling frequency of 48kHz will cause the hard disk space to be used more than the
setting of 44.1kHz, and the available recording time will be shorter. This will be reflected on the
REMAIN value.
• Do not change the sampling frequency during a session (except for a special case). If you change
the setting, data will be played at different speeds and the values stored in the memory keys (time
value or bar/beat/clock) will be changed.
The following procedure assumes that the D-108 is powered on and the top of Program 1 (ABS 0) is located
and shown on the display.
<Sampling frequency menu>
• Default setting: 44.1kHz
• Options: 44.1kHz, 48kHz
• The frequency can be set for each Program.
1. Press the DISP SEL key repeatedly to select
the SETUP mode display.
Pressing the key twice will change the display from the
REMAIN indication to the SETUP display. ([SETUP] flashes.)
OL
0
3
6
9
12
18
24
30
42
1 4 5 6 8
2 3 7
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8
2. Press the EXECUTE/YES key
The display shows the first layer of the SETUP mode menu.
(With the default setting, the [Drive Sel.? ] menu appears.)
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 8
7
3.Turn the JOG dial to select the
[SampleRate?*** (setting the sampling
frequency) ] menu.
The SETUP menu title and the current sampling frequency
(44.1kHz or 48kHz) appear on the display. (With the
default setting, the sampling frequency is set to 44.1kHz.)
You can use the SHUTTLE dial or the HOLD/> key to select
the menu.
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8
• The setting can be saved and loaded as part of the song data.
• The setting is stored after the power is turned off.
4. Press the EXECUTE/YES key.
The display changes as follows and the current sampling
frequency value (44.1 or 48) flashes.
ABS
44.1kHz
5. Turn the JOG dial to select the desired

sampling frequency.

REMAIN
As you turn the dial, two sampling frequencies toggle.
44.1kHz
SETUP
44.1kHz
SETUP
6.Press the EXECUTE/YES key.
44.1kHz
The selection of the sampling frequency is confirmed.
7. Press the EXIT/NO key or the STOP button
to quit SETUP mode.
The previous Time Base indication appears and the
selected sampling frequency value lights up on the
display.
SETUP
44.1kHz
20
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8
SETUP
44.1kHz
SETUP
44.1kHz
SETUP
44.1kHz