Security Settings - Supermicro Supero X8DAE User Manual

Chapter 4: AMI BIOS
PCI Error Log
Use this option to enable PCI error (PERR) logging. The options are Yes and No.
4-4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set first.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Use this feature to set the user's access level. Select Full Access to grant the user
full read and write access to the Setup Utility. Select View Only to grant the user
access to the Setup Utility, but the user is not allowed to change Setup Utility set-
tings. Select Limited to allow the user to change the settings of certain items such
as Date and Time. Select No Access to prevent the user from accessing the Setup
Utility. The options are Full Access, View Only, Limited, and No Access.
4-21