Supermicro Supero X8DAE User Manual page 79

Chapter 4: AMI BIOS
Fan1 ~ Fan8 Reading
This feature displays the fan speed readings from fan interfaces Fan1 through Fan8.
(Fan7 is CPU1 Fan and Fan8 is CPU2 Fan.)
ACPI Configuration
Use this feature to configure Advanced Configuration and Power Interface (ACPI)
power management settings for your system.
ACPI Aware O/S
Select Yes to allow the CPU take control over ACPI settings if it is supported by the
OS. Otherwise, select No to disable this function. The options are Yes and No.
ACPI Version Features
The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website
for further explanation: http://www.acpi.info/.
Suspend Mode
This setting allows you to configure the ACPI (Advanced Configuration and Power
Interface) state for your system when it is in Suspend Mode. The options are S1
(POS), S3 (STR), and Auto.
ACPI APIC Support
Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System
Description Table) pointer list. The options are Enabled and Disabled.
APIC ACPI SCI IRQ
When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.
The options are Enabled and Disabled.
Headless Mode
When this feature is enabled, the system will function normally without a keyboard,
monitor or mouse installed in the system. The options are Enabled and Disabled.
NUMA Support
Select Enabled to enable Non-Uniform Memory Access support to improve CPU
performance for a system that has an OS with NUMA support. The options are
Enabled, Disabled and NUMA for SLES 11.
WHEA Support
Select Enabled to enable Windows Hardware Error Architecture (WHEA) support
which provides a common infrastructure for the system to handle hardware er-
4-19