Table of Contents
Advertisement
2 Installation and Quick Startup
2.1 Package Contents
Before you begin installing the switch, confirm that your package contains the following
items:
•
•
•
•
•
•
•
2.2 Switch Installation
2.2.1 Installing the Switch Without the Rack
1. Install the switch on a level surface that can safely support the weight of the switch
2. Set the switch on a flat surface and check for proper ventilation. Allow at least 5 cm
3. Attach the rubber feet on the marked locations on the bottom of the chassis.
The rubber feet are recommended to keep the unit from slipping.
One Fortinet FortiSwitch-100 Ethernet switch
Mounting kit: 2 mounting brackets and screws
Four rubber feet with adhesive backing
One AC power cord
This User's Guide with Registration Card
CLI Reference
CD-ROM with User's Guide and CLI Reference
and its attached cables. The switch must have adequate space for ventilation and for
accessing cable connectors.
(2 inches) on each side of the switch and 15 cm (6 inches) at the back for the power
cable.
28
Hide quick links:
Advertisement
Table of Contents
