Ip Default-Gateway; Ip Address Protocol - Fortinet MR1 User Manual

Interface-Vlan Config
Command Usage
Once the IP address is set, the VLAN ID's value will be assigned to management VLAN.

5.3.1.7 ip default-gateway

This command sets the IP Address of the default gateway.
Syntax
ip default-gateway <gateway>
no ip default-gateway
< gateway > - IP address of the default gateway
no - Restore the default IP address of the default gateway
Default Setting
IP address: 0.0.0.0
Command Mode
Global Config

5.3.1.8 ip address protocol

This command specifies the network configuration protocol to be used. If you modify this
value, the change is effective immediately.
Syntax
ip address protocol {bootp | dhcp | none}
<bootp> - Obtains IP address from BOOTP.
129