Sunbeam Espresso Vita EM6200 Instruction Booklet page 35

Advanced Programming Options (continued)
Factory Reset
To undo any changes made to the program
you can revert back to the original factory
settings.
To do this you need to follow the instructions
below:
1.Insert the power cord into a 230-240V AC
power outlet and switch the power 'ON'.
Note: Although the espresso machine is ON
at the power outlet ensure that the actual
espresso machine power is 'OFF'. Therefore
no lights will be illuminated on the espresso
machine control panel.
2.Press and hold down the 'POWER' button.
A single long beep will indicate a
successful reset. The espresso machine
will then turn on to 'READY MODE'
Note: This resets ALL the program settings
back to factory settings, including the
program espresso pour volumes, espresso
& steam thermoblock temperatures and the
steam pump rate.
33