Sunbeam Espresso Vita EM6200 Instruction Booklet page 13

Using the control panel (continued)
Note: After 10 minutes of inactivity in the
steam mode, the espresso machine will
automatically switch back to the 'READY
MODE'.
Hot Water
The hot water function allows the coffee
maker to release a controlled flow of hot
water for making long blacks, hot chocolates,
pre-heating cups and glasses and brewing
teas.
To activate the hot water function, the
coffee maker simply needs to press the 'HOT
WATER' button.
Note: When the coffee maker has activated
the hot water function the light around the
'HOT WATER' button will show a constant
red light and the light behind the 'MANUAL',
'SINGLE' and 'DOUBLE' buttons will go off.
Additionally the light on the 'POWER' button
will remain on.
The coffee maker simply needs to turn
the steam and hot water control dial anti-
clockwise to the 'MAX' setting to start and
turn it back to the 'OFF' position to stop.
Press the 'HOT WATER' button again to
deactivate the hot water function.
Note: When you have finished using the hot
water, ensure the steam and hot water dial is
fully turned off. If the steam and hot water
dial is left open, the coffee maker will not be
able to switch to the 'COFFEE' or 'STEAM'
functions.
11