Table of Contents
Advertisement
1. PRESET
[INDOOR / OUTDOOR / LOW LIGHT / LOBBY / HALLWAY / ELEVATOR]
- Used for quick and easy setup for the installation environment.
2. LENS SETUP
- BRIGHTNESS : Adjusts the video brightness (selectable from 1-70)
- IRIS SPEED : Adjusts Iris control speed of the DC lens. If the control
speed is too slow or fast, use this menu to adjust the speed.
- FOCUS ADJ : To adjust the DC lens focus correctly, you must change
MODE to ON under the FOCUS ADJUST menu. Adjust the lens
focus and after the lens focus had been adjusted, change MODE
to OFF.
3. EXPOSURE SETUP
◆ BRIGHTNESS : Adjusts the video brightness.
◆ SHUTTER : You can select either auto or manual shutter.
* A.FLK : Select this when you see picture flicker, this can happen when
the frequency of the local lighting clashes with the camera.
* ESC : Select this to control the shutter speed automatically. If ESC is
selected, the shutter speed is automatically controlled depending
on the ambient illumination of the subject.
* MANUAL : You can control shutter speed manually. (1/60 ~ 1/120,000)
•
--- : Shutter speed is fixed at 1/60 sec. (1/50 sec.)
☞ NOTE
■ When using a DC lens, set the shutter mode to A.FLK if color rolling occurs.
■ When the SHUTTER is set to ESC after selecting Internal Synchronization Type,
the picture may become unstable if the camera faces a bright fluorescent light.
Therefore, take care when choosing the installation position.
■ When the SHUTTER is set to MANUAL or A.FLK mode, INTENSIFY will be
disabled.
OSD MENU DETAILS
7
Advertisement
Table of Contents
