Transparent mode installation
FortiGate-50A Installation and Configuration Guide
Note: This is an example configuration only. To configure a static route, you require a
destination IP address.
Figure 8: Static route to an external destination
Gateway IP 192.168.1.2
Management IP 192.168.1.1
FortiGate-50A
General configuration steps
1
Set the FortiGate unit to operate in Transparent mode.
2
Configure the Management IP address and Netmask of the FortiGate unit.
3
Configure the static route to the FortiResponse server.
4
Configure the default route to the external network.
Internet
Upstream
Router
PWR
STATUS
INTERNAL
EXTERNAL
A
LINK 100
LINK 100
Internal Network
Management
Computer
Transparent mode configuration examples
24.102.233.5
DNS
DMZ
FortiResponse
Distribution
Network (FDN)
49