Adding And Editing Administrator Accounts - Fortinet FortiGate 50A Installation And Configuration Manual

Fortinet fortigate installation and configuration guide
Hide thumbs Also See for FortiGate 50A:
Table of Contents

Advertisement

System configuration

Adding and editing administrator accounts

FortiGate-50A Installation and Configuration Guide
3
Select Apply.
Auth Timeout controls the amount of inactive time that the firewall waits before
requiring users to authenticate again. For more information, see
authentication" on page
The default Auth Timeout is 15 minutes. The maximum Auth Timeout is 480 minutes
(8 hours).
To select a language for the web-based manager
1
Go to System > Config > Options.
2
From the Languages list, select a language for the web-based manager to use.
3
Select Apply.
You can choose English, Simplified Chinese, Japanese, Korean, or Traditional
Chinese.
Note: When the web-based manager language is set to use Simplified Chinese, Japanese,
Korean, or Traditional Chinese, you can change to English by selecting the English button on
the upper right of the web-based manager.
Modifying the Dead Gateway Detection settings
Modify dead gateway detection to control how the FortiGate unit confirms connectivity
with a ping server added to an interface configuration. For information about adding a
ping server to an interface, see
To modify the dead gateway detection settings
1
Go to System > Config > Options.
2
For Detection Interval, type a number in seconds to specify how often the FortiGate
unit tests the connection to the ping target.
3
For Fail-over Detection, type a number of times that the connection test fails before
the FortiGate unit assumes that the gateway is no longer functioning.
4
Select Apply.
When the FortiGate unit is initially installed, it is configured with a single administrator
account with the user name admin. From this administrator account, you can add and
edit administrator accounts. You can also control the access level of each of these
administrator accounts and control the IP address from which the administrator can
connect to the FortiGate unit.
There are three administration account access levels:
171.
"Adding a ping server to an interface" on page
Adding and editing administrator accounts
"Users and
97.
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF