Advertisement
Safety Precautions and Disclaimers
SAFETY PRECAUTIONS
Please read this section carefully before proceeding. These
precautions explain the correct and safe use of this device,
thereby helping to prevent injury to you or others, and also help
you to minimize the risk of damaging the device.
Warnings
Always follow the basic warnings listed here to avoid the risk of
serious injury or death from electrical shock, short-circuiting, fire,
and other hazards. These warnings include, but are not limited to:
• With the exception of the user-swappable parts, do not attempt
to disassemble or modify the enclosure. If this device appears to
be malfunctioning, contact Sonnet Customer Service.
• Do not drop the enclosures or any of its drive modules;
dropping or mishandling of the enclosure or drive modules
may result in a malfunction.
• Do not insert your fingers or foreign objects inside the
enclosure; take particular care when small children are present.
• Do not expose the device to rain, use it near water or containers
that contain liquids which might spill into any openings, or in
damp or wet conditions.
• If unusual smells, sounds, or smoke come from the device, or if
liquids enter it, switch it off immediately and unplug it from the
electrical outlet.
• Follow the instructions in this manual carefully; contact Sonnet
Customer Service for additional advice not covered in this
User's Guide.
DISCLAIMERS
Drive Usage:
Sonnet Technologies has qualified the hard drives listed here
for use in Fusion D800RAID storage systems. These drives were
chosen for their superior performance, error handling, and
reliability characteristics, especially when used in RAID groups.
One important difference between these drives and standard
hard drives is how quickly each handles read errors—these
qualified drives attempt to recover from errors for just a few
seconds, while standard hard drives may take minutes. Because
RAID controller cards and software-based RAID schemes allow
only a very short time for drives to recover before dropping them
from the RAID group, hard drive manufacturers recommend
against using standard hard drives in RAID storage systems. The
hard drives qualified by Sonnet also feature improved vibration
characteristics that influence and support storage reliability. We
recommend the use of these Enterprise/RAID edition hard drives
and select, Sonnet certified desktop hard drives in your Fusion
storage system to ensure system reliability and performance.
STANDARD DRIVES MAY NOT BE SUPPORTED AND MAY
DEGRADE SYSTEM RELIABILITY AND PERFORMANCE. Check
the Sonnet Web site for the latest list of qualified hard drives.
Drive Usage (continued)
500GB Models
• Hitachi Deskstar E7K500, # HDS725050KLA360
• Hitachi Deskstar E7K1000, # HDE721050SLA330
• Hitachi Ultrastar A7K1000, # HUA721050KLA330
• Seagate Barracuda ES, # ST3500630NS
• Seagate Barracuda ES.2, # ST3500320NS
• Western Digital RE3 Enterprise, # WD5002ABYS
750GB Models
• Hitachi Deskstar E7K1000, # HDE721075SLA300
• Hitachi Ultrastar A7K1000, # HUA721075KLA330
• Seagate Barracuda ES, # ST3750640NS
• Seagate Barracuda ES.2, # ST3750330NS
1TB Models
• Hitachi Deskstar E7K1000, # HDE721010SLA330
• Hitachi Ultrastar A7K1000, # HUA721010KLA330
• Seagate Barracuda ES.2, # ST31000340NS
• Hitachi Deskstar E7K1000, # HDE721010SLA330
1.5TB Models
• Seagate Barracuda 7200.11, # ST31500341AS
2TB Models
• Western Digital RE4-GP, # WD2002FYPS
There are unresolved technical issues in the Fusion D800RAID with the
following Enterprise/RAID edition drives, which are not recommended
at this time:
• 500GB Samsung Spinpoint F RAID, # E502IJ
• 750 GB Samsung Spinpoint F RAID, # HE753LJ
• 1TB Samsung Spinpoint F RAID, # HE103UJ
(1) Only Seagate ES.2 drives with firmware versions SN06 and newer
compatible. Seagate ES.2 drives with firmware versions SN03, SN04, or
SN05 are NOT compatible.
(2) Only Seagate Barracuda 7200.11 1.5TB drives with firmware versions
SD1B and newer compatible.
3
(1)
(1)
(1)
(2)
Advertisement
