• 1TB Hitachi Ultrastar A7K1000, model #HUA721010KLA330 • Follow the instructions in this manual carefully; contact Creating RAID Volumes Under Windows: Sonnet Customer Service for additional advice not covered in Creating RAID volumes under Windows requires dynamic disk this User’s Guide.
Infiniband connector Figure 5 2. Connect the mini-SAS end of data cable to a port on the Sonnet RAID controller card; verify the connector is plugged in securely (Figure 5). 3. Connect the supplied power cable between the Fusion D400RAID enclosure and a grounded wall outlet or power strip;...
Page 5
You may contact the hard disk drive manufacturer directly to replace a faulty hard drive. • If you remove a module from the Fusion D400RAID with a For Hitachi hard disk drives, go to http://www.hitachigst.com/ Under “Support”, select “Warranty/RMA” and follow the instructions drive that was part of a RAID group, you should power off For Seagate hard disk drives, go to http://www.seagate.com/ and...
Need help?
Do you have a question about the FUSION D400RAID and is the answer not in the manual?
Questions and answers