Radius System 100 And 81/110 Installation - Sonnet Crescendo G3 NuBus Installation Manual

3. Open your computer by first removing the four security screws on
the back of the computer (Figure 1) with a medium Phillips
screwdriver; then, carefully remove the side panel.
Temporarily Remove Power Supply Brace
Lay the computer on a flat surface. Touch the power supply metal
shielding (Figure 2) to discharge any potential damaging static
electricity. To easily gain access to the PDS slot, temporarily remove the
power supply brace by unscrewing it and lifting it up and out of the
interior of the computer (Figure 2).
Figure 2: Touch power supply metal shielding and remove power supply brace
Figure 1: Remove case cover from computer
power supply
metal shielding
Radius System 100 and 81/100 Installation
security screw
security screw
security screw
security screw
power supply brace
69