Install Crescendo Card - Sonnet Crescendo G3 NuBus Installation Manual

Chapter 3
Install Video Flex Cable Onto Crescendo Card
Install the video flex cable into the pass-through slot of the Crescendo
card (note the notch in the cable for orientation). Press down on the
outer edges of the cable until it is firmly seated (Figure 19).
notch in cable
pass-through slot
Figure 19: Attach video flex cable to Crescendo card
Install Crescendo Card Into PDS Slot
Align the Crescendo card over the PDS slot on the logic board. Gently
press down until the card is firmly seated in the PDS slot (Figure 20).
Crescendo card
(with attached video flex cable)
PDS slot
Figure 20: Install Crescendo card into PDS slot
30