Power Macintosh 6100, Performa 611X - Sonnet Crescendo G3 NuBus Installation Manual

Chapter 1
Power Macintosh 6100, Performa 611X, and Workgroup
Server 6150 Crescendo Installation
Support Note:
information on your hard drive prior to installing new hardware or
software. When handling computer products, you must take care to prevent
components from being damaged by static electricity. Avoid carpeted areas,
handle processor upgrade cards only by their edges, and avoid touching
connector traces and component pins.
Install Software
1. If you are upgrading to Mac OS 9 as part of this installation,
do so now. Sonnet recommends a clean/universal install of the
Mac OS. Start up your computer from the Mac OS CD and double
click the Mac OS Install application. In the Select Destination
window, click the Options button and click the Perform Clean
Installation check box that appears in the subsequent screen.
Click the Select button. Proceed through the next several screens
until you reach the Install Software window. Click the Customize
button. In the Custom Installation and Removal window click
the pop-up menu to the right of Mac OS 9. Change the
"Recommended Installation" to "Customized installation." The
Select Mac OS 9 Features to Install window will appear shortly.
Change "Recommended Installation" to "Universal Installation"
from the pop-up menu. Click OK, Start, then Continue to
complete the installation. After the software is installed, quit the
Mac OS Install application and restart your computer from the
hard drive where Mac OS 9 is installed.
2. Insert the Crescendo/Encore Install diskette into the floppy disk
drive. Double click the Crescendo/Encore Install icon. By default,
with "Easy Install" selected from the pop-up menu, the required
software will be installed into the active System Folder on the
boot drive. If this is ok, click the Install button; otherwise, select
"Custom Install" from the pop-up menu for more options or
select another drive to install the software. The installer will
install the appropriate software into the System Folder of your
computer. If the installation was successful, a dialog box will
appear. Click Quit to leave the installer and shut down your
computer.
2
We recommend that you make a backup of important