Amana PBWS01A Installation Instructions

Amana PBWS01A Installation Instructions

Wall sleeve

Advertisement

PBWS01A
Wall Sleeve
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to
know the product better than the customer. This
includes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize
yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during
installation or repair, it is possible to place yourself
in a position which is more hazardous than when
the unit is in operation.
IO-657
Table of Contents

General Information ................................................................. 1

Preinstallation Considerations ................................................ 2
Wall Sleeve Installation ........................................................... 3
Condensate Drain Kit ............................................................... 3
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
®
Installation Instructions
General Information
The wall sleeve must be installed before the air
conditioner chassis can be set in place. Read the
instructions thoroughly before proceeding.
Remember, it is your responsibility to install the
product safely and to know it well enough to be able
to instruct a customer in its safe use.
Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual
are intended as supplemental to existing practices.
However, if there is a direct conflict between existing
practices and the content of this manual, the
precautions listed here take precedence.
March 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PBWS01A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Amana PBWS01A

  • Page 1 ® PBWS01A Installation Instructions Wall Sleeve General Information The wall sleeve must be installed before the air conditioner chassis can be set in place. Read the instructions thoroughly before proceeding. Table of Contents General Information ..............1 Preinstallation Considerations ..........2 Wall Sleeve Installation ............
  • Page 2 Preinstallation Considerations Before proceeding with the sleeve installation, ensure the following guidelines for locating the wall opening and sleeve are met: • The wall opening must be the correct size. See Figure 1 for wall sleeve dimensions and Figure 3 for minimum 15 3/4"...
  • Page 3 Waterproof barrier should remain in place until the unit is Wall Sleeve Installation installed. An accessory metal front panel, PBWMFC, is After the wall opening is checked and approved for strength, also available, but must be purchased separately. location, size, and clearances, install the wall sleeve as follows: •...
  • Page 4 ©2002 - 2006 Goodman Company, L.P. Fayetteville, TN 37334...

Table of Contents