Amana PTAC FUSE HOLDER KIT (FHK) Installation Instructions

FUSE HOLDER KIT (FHK)
D
ISCONNECT POWER SOURCES BEFORE INSTALLING FUSE KIT
RESULT IN INJURY OR DEATH DUE TO ELECTRICAL SHOCK
ELECTRICAL POWER TO THE UNIT
T
O AVOID THE POSSIBILITY OF PROPERTY DAMAGE
. S
POLARIZATION EE SPECIFIC INSTRUCTIONS
U
SE ONLY COPPER CONDUCTORS FOR ELECTRICAL CONNECTIONS
RESULT IN GALVANIC CORROSION
A
LL WIRING MUST COMPLY WITH APPLICABLE LOCAL AND NATIONAL CODES
(
DISCONNECT SWITCH ES
RESULT IN OVERHEATING AND EQUIPMENT FAILURE
As a professional installer you have an obligation to know the product better than the customer. This
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during installation or repair it is possible to place yourself in a
Remember, it is your responsibility to install the product safely and to know it well enough to be able to
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of
The precautions listed in this Installation Manual are intended as supplemental to existing practices.
However, if there is a direct conflict between existing practices and the content of this manual, the
Part No. A3491606
Printed in USA
I
NSTALLATION
.
.
,
RESULTANT EQUIPMENT FAILURE
)
MUST COMPLY WITH ALL APPLICABLE CODES

ATTENTION INSTALLING PERSONNEL

includes all safety precautions and related items.
position which is more hazardous than when the unit is in operation.
instruct a customer in its safe use.
specific good safety practices...follow them.
precautions listed here take precedence.
PTAC
I
NSTRUCTIONS

WARNING

. F
AILURE TO DISCONNECT ELECTRICAL POWER MAY
. T "OFF"
HE UNIT
WARNING
, ,
PERSONAL INJURY OR DEATH
CAUTION
. T
HE USE OF OTHER TYPES OF CONDUCTORS MAY
,
OVERHEATING OR FIRE
CAUTION
. F
AILURE TO FOLLOW THESE CODES COULD
.
SWITCH DOES NOT DISCONNECT ALL
,
INSTALLER MUST USE PROPER
.
. T
YPE AND LOCATION OF FUSED
Effective: December 2003