SIIG UltraATA 133 PCI RAID Quick Installation Manual page 22

Hide thumbs Also See for UltraATA 133 PCI RAID:

Medley GUI

The Medley GUI provides significant functionality

including the ability to create and dissolve RAID sets;

Remove a member of a Mirrored or Mirrored-Striped

RAID set; Rebuild a Mirrored RAID set; save, copy, or

send, via e-mail, the current configuration.

Installing Medley GUI

Place the driver installation CD into the CD-ROM

drive.

At the Windows desktop click Start, then Run.

Type D:\Installsiicfg.exe, then click OK.

Click Next, Next, then Finish respectively.

The installation of the Medley GUI is now complete.

Proceed to Using the Medley GUI for operating

instructions.

Using Medley GUI

During the installation process, the Medley GUI was

saved in the Windows Startup folder, a small blue Medley

logo will appear in the right-hand corner of taskbar. To

launch the GUI, simply click on the icon.

Upon launching the GUI, the the first window which

identifies the computer running Medley should appear

similar to the following.

Table of Contents