SIIG UltraATA 133 PCI RAID Quick Installation Manual page 13

4. Double click PCI RAID controller listed under
Other Devices.
5. Select Driver tab, then click Update Driver button.
6. Insert the driver CD, then click Next.
7. Select Search for the better driver ... and click Next.
8. Check Specify a location, uncheck the other boxes,
type in D:\32bit (change D: to match CD-ROM),
then click Next. Click Next again.
9. Click Finish, remove the driver CD, then click Yes to
restart Windows to complete the installation.
When Windows resumes, go to Medley GUI on page 22
and install the RAID monitoring utility.
For Existing Windows 98SE Installation
1. Setup the RAID array prior to driver installation and
boot up to Windows.
2. At the Add New Hardware Wizard, click Next to
continue.
3. Select Search for the best driver for your device,
then click Next.
4. Check Specify a location, uncheck the other boxes,
type in D:\32bit (change D: to match CD-ROM),
then click Next. Click Next again.
5. Click Finish, remove the driver CD, then click Yes to
restart Windows to complete the installation.
When Windows resumes, go to Medley GUI on
page 22 and install the RAID monitoring utility.
13