Operating Modes - Shure PSM700 User Manual

Operating Modes

This section illustrates the three basic modes of operation. For additional installations, including those for
multiple systems, see the LOOP Applications section.
NOTE: Although a mixing console is shown as the audio source in the following diagrams, you can use any
balanced or unbalanced outputs at LINE level (for example, CD players, DAT machines, and microphone
preamplifiers). For best results, use LINE level audio signals.
Stereo
Use this setup when outputs 1 and 2 from the mixer are the left and right channels of a stereo mix. The left
channel goes to the left earphone, and the right channel goes to the right earphone. The balance control on the
receiver moves the stereo image left and right.
1.
1. Connect the mixer outputs to the transmitter.
2. Set the SOURCE switch on the P7T front panel to STEREO.
3. Set DIP switch 2 of the P7R Receiver to STEREO.
MixMode™ Operation
Use this setup when outputs 1 and 2 from the mixer are different mono mixes. Each mix goes to both
earphones. The performer uses the balance control on the receiver to make one mix louder than the other. The
total volume remains equal in both ears.
1.
1. Connect the mixer outputs to the transmitter.
2. Set the SOURCE switch on the P7T transmitter to STEREO/MixMode.
3. Set DIP switch 2 on the receiver to MixMode.
6
- English
2.
2.
3.
0
1 2 1 2
3.