AOpen AX4SG Online Manual page 97

A X 4 S G / A X 4 S G
A X 4 S G / A X 4 S G
********************************************************************
BroadCom Ethernet Driver Install Guide under Win98SE/ME
********************************************************************
1. Open the Device Manager and check if there is a "PCI Ethernet Controller" in "Other devices"
2. Insert the supplied "Bonus CD"
3. Click "PCI Ethernet Controller"-> "Driver" -> "Update Driver" and Select "Install the software automatically (Recommended)"
And then Click "Next".
4. When prompted, insert the media to be searched into your CD-ROM drive, type the path to the driver, and select OK.
Example: e:\Driver\Lan\BCM4401
Where "e:\Driver\Lan\BCM4401" is the designation of the driver on your system.
5. In the Driver Files Search Results window, verify that the correct path to the driver software is shown, and then click next.
6. Then OS will request to insert the Bonus CD into CD-ROM Driver
7. Type the path of the BroadCom Ethernet driver and select "OK"
Example: e:\Driver\Lan\BCM4401
Where "e:\Driver\Lan\BCM4401" is the designation of the "bcm4sbe5.sys" on your Bonus CD.
8. BroadCom Ethernet driver installation finish
************************************************************************
BroadCom Ethernet Driver Install Guide under Windows NT4.0
************************************************************************
1. Verify that the Windows NT system is upgraded with Service Pack 4 or later.
- N / A X 4 S G - L
- N / A X 4 S G - L
97
O n l i n e M a n u a l
O n l i n e M a n u a l