Installing Usb 2.0 Driver - AOpen AX4SG Online Manual

A X 4 S G / A X 4 S G
A X 4 S G / A X 4 S G
I n s t a l l i n g U S B 2
I n s t a l l i n g U S B 2
*Windows 98SE Installation Guide
****************************************************
Installing Drivers with Existing Windows 98SE
***************************************************
The following section details the installation of USB 2.0 driver on a system that has Windows 98SE already installed.
1. Enable the USB 2.0 controller and boot Windows.
2. The "Add New Hardware Wizard" will appear, informing you that it has found a "PCI Universal Serial Bus."
3. Click on "Next," and from the generated list box, choose "Search for best driver for your device (Recommended)".
4. Insert the "Bonus CD" in CD-ROM.
5. Click on "Next," and from the generated choices, choose "Specify a location."
6. Type "[CD-ROM]:\Driver\Intel\USB2.0\Win98ME" in the text box that appears.
7. Click on "Next." A message informing you that Windows has found "Intel USB 2.0 Enhanced Host Controller" should appear.
8. Click on "Next," and then on "Finish."
*****************************************************
Confirming Driver Installation in Windows 98SE
*****************************************************
To confirm that the driver has been properly loaded in Windows 98SE, perform the following steps:
1. Choose "Settings" from the "Start" menu.
2. Choose "Control Panel," and then double-click on the "System" icon.
- N / A X 4 S G - L
- N / A X 4 S G - L
. 0 D r i v e r
. 0 D r i v e r
92
O n l i n e M a n u a l
O n l i n e M a n u a l