Table of Contents
Advertisement
A
X
4
B
-
5
3
3
P
l
u
s
A
X
4
B
-
5
3
3
P
l
u
s
5. When the Windows 2000 supported SCSI adapter drivers list appears, click Have disk.
6. Insert the SATA150 TX2Plus driver diskette in drive A:\.
7. Type A:\Win2000 in the text box. Click OK .
8. Choose "Win2000 Promise SATA150 TX2Plus (tm) IDE Controller" from the list that appears on screen, then click Next.
9. Click Yes to confirm continue the installation and copy the driver to system.
10. If you are using a driver that has not been digitally signed by Microsoft, you will be asked if you want to continue the
installation. Click on Continue anyway.
11. Remove the diskette and click Finish to restart the system. Windows 2000 will then restart for the driver installation to take
effect.
Confirming Windows 2000 Installation
1. From Windows 2000, open the Control Panel from My Computer icon followed by the System icon.
2. Choose the Hardware tab, and then click the Device Manager tab.
3. Click the "+" in front of SCSI controllers. "Win2000 Promise SATA150 TX2Plus (tm) IDE Controller" should appear.
Windows Me
After installing the SATA150 TX2Plus controller and rebooting your system, Windows ME setup will show a "New Hardware
Found" dialog box.
Under Windows ME, "PCI Mass Storage Controller" will be displayed.
1. Insert the SATA150 TX2Plus Driver" diskette in drive A:
84
O
n
l
i
n
e
M
a
n
u
a
l
O
n
l
i
n
e
M
a
n
u
a
l
Advertisement
Table of Contents
