Fixed Defects - American Dynamics MegaPower 3200 Release 2.0 Release Notes

Fixed Defects

(from EASY CPU version 1.3 and ADMPCPU version 1.06)
Table 6. Fixed defects
Defect Description
1520 Definitions\Satellite Sites. Warning if you attempt to input a null character.
1593 SnapShot fields in EASY CPU Options Window not updated when file read from MPU.
1596 Pseudo numbers are not displaying properly. They sometimes show physical camera numbers instead.
1769 Error occurs when attempting to access categories relating to previously deleted data.
1798 Deleting keyboards in 'ADMPCPU > Definitions > Keyboards' will not permit them to be reentered.
1850 EASY CPU Passive Hot Switch Status only updates or shows status of CPU #1 IP address.
1851 Easy CPU should be able to update configuration data of both CPUs in dual mode and TOD to all
satellite CPU.
1852 Leaving the cursor in the most recently changed field and 'saving' does not always accept new value.
1877 After launching the Configurator, the first attempt to write yields "forcibly closed" error.
1911 EASY CPU configurator cannot open configuration files saved by activity logging.
1917 A File/Write should have four check boxes for CPU #1, CPU #2, system folder, and backup.
1920 Selecting "[] Use the configured address" during Write doesn't display target IP address(es) as a
confirmation.
1921 The "Passive Hot Switch Status" display screen headings are unclear.
2006 Load test with SensorNet + ADDL, or ADDL alone causes poor manual PTZ control.
2009 Editing Enhancements- Alarms section.
2016 ADMPCPU is transmitting more data than it has to and incorrectly sets record bits to EASY CPU.
2018 EZ-CPU Satellite Sites won't accept Host Port values of zero, if already set to value greater than zero.
2019 Switching>Salvo>Alarm Contacts screen - Add & Remove button not working.
2020 Unhandled Exception Error appears when trying to add a monitor to Tours in the Event Timer.
2032 Cut & Paste doesn't do anything of value for Tours either within same or multiple instances.
2033 Creating Tours in S3 can cause problems when imported to EASY CPU.
2050 Unable to save program properly after edit in Partitions section.
2057 Event Timers not being deleted from ADMPCPU memory.
2072 Saving and writing configs to the ADMPCPU, write fails to become active after save.
2083 Camera Status stuck in loop when connection to ADMPCPU doesn't exist or fails.
2090 The VideoLoss processing doesn't specify the camera number of the alarmed video.
2109 Alarm messages not always being displayed on the monitor when they are being queued.
2112 Keyboard PRIORITY control-override configuration is not working.
2129 Presets >8 for Cameras >1024 are not being transmitted on the proper AD Data Line.
2134 Salvo and Tour names entered into EASY are not saved to/restored from the MPU.
2135 Camera titles increase field size when generated automatically.
2154 Copy/Paste menu function causing an anomaly where a different value is pasted than was copied.
2155 The keyboard contention message does not correctly display keyboard numbers above 99.
2157 Reducing the System > Options - Max Cameras Configuration results in unexpected data loss.
2160 ADMPCPU sending more than one email for alarms.
2168 Systems>options menu: max configurations should default to Cameras=1024, Monitors=128 &
Alarms=1024.
2172 Duplicate alarm contacts.
2185 Alarms cannot be turned off.
MEGAPOWER 3200 RELEASE 2.0
RELEASE NOTES
15 of 16
8200-0421-19, REV. A