It is important that all
areas where the bed cover
mounts are clean and free
of debris prior to installing.
D
1
The serial number for the cover is located here.
For future reference, write it here:
_____________________________________________
TruXedo Inc. • 2209 Kellen Gross Drive Yankton, SD 57078 • 877-878-9336 • truxedo.com ©TruXedo Inc., 2022
E
F
G
OWNER'S MANUAL
Damaged or missing parts?
Call 877-878-9336 Mon - Fri 8 a.m. - 5 p.m. CT
Parts will be shipped to you factory direct. Do not return kit to
place of purchase. To view install video visit truxedo.com/truxport
A
PARTS INCLUDED IN YOUR KIT:
A
B
C
D
E
F
G
TOOLS REQUIRED
•
1/2" wrench or socket
TOOLS RECOMMENDED
•
Scissors/utility knife
2
If a bulkhead seal (D) is included with the cover, clean
the top of the bulkhead. Peel the backing and adhere
the seal from one bedrail edge to the other. Remove any
excess with scissors or a utility knife. If the truck has a drop-in
bedliner, no seal will be needed.
C
B
Driver side rail
Passenger side rail
Cover assembly
Bulkhead seal (on select make/models)
2x Cab corner seals
2x Tailgate corner seals
6x Clamps
NOTE: Position
bulkhead seal
(D) flush with
the inside edge
of bulkhead.
Part# 1116032 Rev. AK 4-20-22
Need help?
Do you have a question about the TruXport and is the answer not in the manual?
Questions and answers