Chapter 2 Installation; Site Requirements; Ventilation; Power - Allied Telesis CentreCOM AT-MR415T Installation Manual

Chapter 2
Installation

Site Requirements

Ventilation

AT-MR415T/AT-MR815T Micro Repeaters have openings on both sides for
ventilation. Although these Micro Repeaters do not require an internal fan to
aid in cooling, adequate ventilation is required. Ensure that the ventilation
openings located on the sides of the chassis are never blocked.
Maximum ambient temperature is 104

Power

Be sure that the voltage and frequency to the AC adapter is compatible with
the country of use and, therefore, the power provided. Since there is no
external power switch, power is applied when the power cord from the AC
adapter is connected to the DC receptacle of your repeater.
Power to the hub must be sourced only from adapter in the package or
direct plug in type approved adapter rated 7.5Vdc, 500mA.
Note
o o
F (40 C).
Note
9