Windshield Washer Fluid; Checking And Adding Washer Fluid - Ford 1999 F-350 Owner's Manual

1. Clean the reservoir cap before
removal to prevent dirt and water
from entering the reservoir.
2. Remove cap and rubber
diaphragm from reservoir.
3. Add fluid until the level reaches
the step in the reservoir.
4. Reinstall rubber diaphragm and
cap onto reservoir.

WINDSHIELD WASHER FLUID

Checking and adding washer fluid

Check the washer fluid whenever
you stop for fuel. The reservoir is
highlighted with a
If the level is low, add enough fluid
to fill the reservoir. In very cold
weather, do not fill the reservoir all
the way.
Do not put engine coolant in the container for the windshield
washer fluid.
Maintenance and care
symbol.
177